Posts Tagged ‘mold’
Friday, August 8th, 2008
Clay walls are naturally mold resistant and “breathable” which helps
circulate the air and remove allergens. Left over clay can be discarded
directly on the ground with absolutely no ill effects on the Earth.
Denim insulation is flame retardant, mold resistant, and has a higher
insulation value per inch than fiberglass. It has no formaldehyde and
is great sound proofing.
Concrete counters and floors don’t harbor mold or other allergens.
If every house in Los Angeles had solar panels installed it could< (more…)
Tags: allergens, bulbs, carbons, cfl, cfls, chemicals, clay walls, concrete counters, containers, countertop, countertops, doe, dual pane windows, earth, energy, energy efficiency, fiberglass, flame retardant, floor models, floors, footprint, formaldehyde, glass, green, hvac, ill effects, illnesses, increases energy, insulation, insulation value, insulator, linoleum, low e glass, mold, molds, natural, nature, power, recycle, recycled glass countertops, recycling, savings, ships, solar panels, sound proofing, state of california, toxic chemicals
Posted in Going Green | 9 Comments »
Friday, August 1st, 2008
Wind Turbines
The tallest wind tower in America — 345 feet — is in Scurry County,
Texas at Enel North Americas Snyder Wind Project. By comparison, the
Statue of Liberty is 305 feet.
The tips of a 300 foot diameter wing spread are moving at about 100 mph.
The blades revolve about 21 times per minute.
Who taps the wind?
Germany leads all nations in production of wind power. It also has a huge
investment in solar power. Both technologies are heavily boosted by tax
incentives.
Below are the World Wind Energy Association’s rankings of wind power by
megawatts installed:
Germany 22,247
United States 16,819
-Texas 4,356
- California 2,439
Spain 15,145
India 7,850
China 5,899
Wind through the home:
All homes need adequate ventilation. Without it, contaminants such as
formaldehyde, volatile organic compounds (VOCs), unpleasant orders can
linger, radon gas can accumulate, and excess moisture will cause mold
growth.
In the past most homes got adequate ventilation from the natural air moving
through the unsealed windows and doors, etc. But with improved housing
technology, uncontrolled ventilation has been drastically reduced to such
an airtight degree that it’s necessary to compensate by installing a whole
house ventilation system. You may remember attic fans, same thing, just
new and improved.
Most applicable in cold climates during the summer. Not advisable in warmer
climates with humid summers because the fan can draw moist air into wall
cavities, where it may condense and cause moisture damage. However, even
in those locations, they can be run in the fall and early spring.
Whole house ventilation systems creates healthy home enviroments and are
extremely energy effiecient especially compared to air conditioning.
Tags: adequate ventilation, attic fans, california 2, china, climate, cold climates, contaminants, creating, energy, excess moisture, foot diameter, gas, house s, housing technology, humid summers, lead, megawatt, megawatts, moist air, moisture damage, mold, mold growth, molds, natural, nature, power, systems, tax incentives, ventilation system, volatile organic compounds, whole house ventilation, wind, wind project, wind tower, wind turbines, windows and doors, world
Posted in Wind Power | 9 Comments »
Saturday, June 28th, 2008
A professor, at Rutgers University, has developed an inorganic paint called Ultimate
Paint. This paint is displaying some very remarkable abilities. Such as: graffiti
resistant; repairs concrete; mold resistant; fire proof; dries nearly as hard as a
diamond, and lasts 1,000 years. How do they know? The chemistry of the coating is
an aluminosilicate, the same formula used for the Chinese terracotta army which is
more than 2,000 years old. (more…)
Tags: aluminosilicate, car, car exhaust, chineseoxygen gases, concrete mold, energy, fire proof, infrastructure, initial results, inorganic paint, mold, molds, nano particles, nitrogen oxide, organic particles, paint, paints, remarkable abilities, rutgers university, s rays, sun, terracotta army, test phase, titanium oxide, transportation infrastructure, ultimate paint, uv energy
Posted in Going Green | 21 Comments »
Friday, June 27th, 2008
I am sure that you have heard or seen these before, but I feel the need to share them
with you to help out in your everyday living.
- Peel a banana from the bottom and you won’t have to pick the little “stringy
things” off of it. That’s how the primates do it. Take your bananas apart when you
get home from the store. If you leave them connected at the stem, they ripen faster.
- Store your opened chunks of cheese in aluminum foil. It will stay fresh much
longer and not mold!
- Peppers with 3 bumps on the bottom are sweeter and better for eating.
- Peppers with 4 bumps on the bottom are firmer and better for cooking. (more…)
Tags: aluminum foil, baking dish, bottoms, boxes, cake frosting, calories, candy bars, car, chunk, cream, cream cheese, cupcakes, delicious dessert, dish, dishes, energy, everyday living, food chopper, ground beef, heavy cream, leaves, light taste, lights, living, mold, molds, nonstick skillet, pets, primates, rain, refrigerator, registers, reheat pizza, scrambled eggs, soil, sour cream, vanilla ice, warm biscuits, water
Posted in Natural Living | 19 Comments »
Tuesday, June 24th, 2008
Insulated Concrete Forms
Yesterday in the Greensburg update ICFs (Insulated Concrete Forms), were talked about
as being the green building material of choice on at least a couple of projects. This
stuff caught my interest so I delved into it a little. Here’s what I found. (more…)
Tags: allergens, building material, energy, green, insulated concrete forms, insulator, interior temperatures, mold, ravages of time, rebar, recycled materials, recycling, s, slots, spacer, styrofoam, time fire, unused portions, wind
Posted in Going Green | 10 Comments »